Estimates

Estimates

Estimates

Estimates
We understand the design process is sometimes in a constant state of change. Designs under constant development coupled with tight scheduling is one of our specialties. Providing as much information as possible in the early stage will help secure an accurate quote. Some of the items we look for when quoting are Schematics, BOM (Parts List), Mechanical drawings or requirements, Statement of work, and testability requirements ICT.

Estimates
We understand the design process is sometimes in a constant state of change. Designs under constant development coupled with tight scheduling is one of our specialties. Providing as much information as possible in the early stage will help secure an accurate quote. Some of the items we look for when quoting are Schematics, BOM (Parts List), Mechanical drawings or requirements, Statement of work, and testability requirements ICT.

We understand the design process is sometimes in a constant state of change. Designs under constant development coupled with tight scheduling is one of our specialties. Providing as much information as possible in the early stage will help secure an accurate quote. Some of the items we look for when quoting are Schematics, BOM (Parts List), Mechanical drawings or requirements, Statement of work, and testability requirements ICT.

Packaging

Packaging

Packaging

Once we receive your schematics we will link our footprints from our extensive library to your schematic. For any components that are not in our library we will create them at this point. Early schematic errors are caught at this point. We do offer the optional additional step and link 3d models with the library footprint. This extra step allows 3-dimensional views of the board once the placement is complete.

Once we receive your schematics we will link our footprints from our extensive library to your schematic. For any components that are not in our library we will create them at this point. Early schematic errors are caught at this point. We do offer the optional additional step and link 3d models with the library footprint. This extra step allows 3-dimensional views of the board once the placement is complete.

Once we receive your schematics we will link our footprints from our extensive library to your schematic. For any components that are not in our library we will create them at this point. Early schematic errors are caught at this point. We do offer the optional additional step and link 3d models with the library footprint. This extra step allows 3-dimensional views of the board once the placement is complete.

Placement

Placement

Placement

During the placement phase we gather all your mechanical requirements and place the components accordingly. We'll address any height restrictions, board thickness, fixed component locations, connector orientations, etc in this phase.

During the placement phase we gather all your mechanical requirements and place the components accordingly. We'll address any height restrictions, board thickness, fixed component locations, connector orientations, etc in this phase.

During the placement phase we gather all your mechanical requirements and place the components accordingly. We'll address any height restrictions, board thickness, fixed component locations, connector orientations, etc in this phase.

Routing

Routing

Routing

Once the placement has been approved we will begin the routing phase. All boards are routed by hand to ensure the cleanest most efficient routes. We do have experience with our Autorouters and we will use them on request. It is our experience that no router can compete to that extra layer of attention that 20+ years of experience designing gives.

Once the placement has been approved we will begin the routing phase. All boards are routed by hand to ensure the cleanest most efficient routes. We do have experience with our Autorouters and we will use them on request. It is our experience that no router can compete to that extra layer of attention that 20+ years of experience designing gives.

Once the placement has been approved we will begin the routing phase. All boards are routed by hand to ensure the cleanest most efficient routes. We do have experience with our Autorouters and we will use them on request. It is our experience that no router can compete to that extra layer of attention that 20+ years of experience designing gives.

Post Route Cleanup

Post Route Cleanup

Post Route Cleanup

In this phase the board goes through a one over to clean silkscreen, move reference designators off pads, check mask clearances, handle fabrication and assembly documentation.

In this phase the board goes through a one over to clean silkscreen, move reference designators off pads, check mask clearances, handle fabrication and assembly documentation.

In this phase the board goes through a one over to clean silkscreen, move reference designators off pads, check mask clearances, handle fabrication and assembly documentation.

previous arrow
next arrow
Slider